Skip to content

Your first brew plan

Brew your first beer: does the plan fit?

Choose 5 or 10 litres, check your equipment and fermentation temperature, then get ingredients, water volumes and next steps. You can plan without an account.

Prepare my brew plan

Pazifischer Donnerkeil · West Coast IPA

Dry and resinous with Columbus, Simcoe and Galaxy. A strong, bitter beer with multiple mash rests, a hop stand and dry hopping: choose it if you enjoy this flavour and want to try the additional steps.

“The beer is very good, exactly as I wanted: dry and resinous with my favourite hops.” — Jonas, Craft Beer Wizard, 24 October 2026 (translated)

Jonas has brewed the recipe. The stored reference is 40 L; actual brewed volume and measurements are not yet documented. The 5 and 10 litre adaptations offered here have not yet been brewed.

The adaptation uses the stored version with 23 EBC and an estimated 51 IBU. The linked community version differs (10 EBC, 68 IBU, 7.1% ABV).

1. Batch size and equipment

The plan reserves 20% kettle headspace and 30% fermenter headspace. Five litres into the fermenter yields less packaged beer after hop and yeast losses.

Check equipment values: water-planning assumptions

Defaults are estimates for a small pot. A water trial gives actual evaporation. All-in-one minimum fill and grain-basket limits come from the device manual; volume checks do not replace them.

You also need

  • Grain bag or basket; ability to hold 63/67/72/78 °C; a separate sparge-water pot and safe draining support.
  • Thermometer, grain scale and fine scale for small hop additions, stirring spoon and a way to cool wort to 18 °C.
  • Fermenter with airlock, cleaner and brewing sanitiser, hydrometer or alcohol-corrected refractometer.
  • For later: bottling tube, pressure-rated beer bottles and closures. Calculate priming sugar for actual packaging volume.
2. Where will your beer ferment?

US-05 is an ale yeast. Plan to keep beer within 18–20 °C; a constant 19 °C also works for this plan. The instructions use your confirmed range. Fermentation can warm beer above room temperature; check at the fermenter, preferably using a beer-temperature probe.

Fermentis lists an ideal range of 18–26 °C for US-05. This reference uses the narrower 18–20 °C range for its intended profile. If your conditions do not fit, the yeast is not silently replaced. Fermentis US-05

Your next steps

  1. Check batch size, equipment and fermentation conditions.
  2. Read the plan and shopping list; confirm equipment assumptions before buying.
  3. Save the recipe and set aside a brew day.
  4. Start the brew session on brew day, measure and record changes.
  5. Package after fermentation is complete, then record flavour and improvements.
Open the existing BIAB guide